2024 Toyota Tundra Wheels Problems

“Factory alignment was out of specification causing premature tire wear. The original factory Toe and Camber angle settings for the front wheels caused feathering and premature wear on the outside shoulders of the tires. My VIN was not included in the Service Campaign but per the dealer it was the exact same issue they have observed in other Tundras. I contacted Toyota and was not able to get resolution regarding a new set of tires”

“I am the original owner of a brand new 2024 Toyota Tundra TRD Pro, and this issue began within the first 15,000 miles of regular dealer-maintained use. At approximately 14,800 miles, I noticed unusual and rapid outer shoulder wear on all four OEM Falken Wildpeak A/T3W 285/65R18 tires. A professional alignment inspection performed by Toyota Carlsbad dealership confirmed that the factory-set front toe angle was significantly out of Toyota’s specification (left front toe: +0.30°, right front: +0.10°, total front toe: +0.39°). …”

“Both front tires have premature wear to the outer edge. Additionally, all four tires have warned to 3/32 with less than 30,000 miles on them. Vehicle has been serviced by Toyota every 5,000 miles. All components have been inspected and per Toyota the vehicle alignment is within spec per manufacture. That being the case, the tires shouldn't wear unless there is a manufacture defect. Toyota nor Falken wants to honor the warranty or take responsibility for the defect of the OEM equipment. Toyota has a TSB for the Tundra alignment with 18 tires but refuse to add trucks with the 20 tires. …”