2018 Ram 3500 Electronic stability control Problems

“Death wobble while driving down interstate going around 50/60 MPH. I hit a bump in the road as I was traveling onto a bridge and truck started shaking 'dangerously' out of control. The truck didn't stop shaking until I slowed down to around 30 MPH. It was hard to hold truck into highway lanes and I almost hit the guard rail on my right. The truck shook for at least 5 to 10 seconds and after getting back control of vehicle it did the same thing seconds later. This is very dangerous could have caused accident and loss of life!”

“The contact owns a 2018 Ram 3500 and towing a 17,500 lbs RV 5th Wheel. The contact stated that while driving at approximately 60 MPH, the ABS and ESC warnings were illuminated. The contact stated the cruise control was engaged but when the ABS warning light illuminated, the cruise control disengaged. The failure was intermittent but was also occurring when not towing. A dealer was not contacted. The vehicle was not diagnosed and was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 50,000.”

“The contact owns a 2018 Ram 3500. The contact stated while driving at an undisclosed speed, the ABS and traction control warning lights illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the ABS control module. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 22V140000 (Service Brakes, Hydraulics, Electronic Stability Control (ECS), but the VIN was not included. The manufacturer was not notified of the failure. The failure mileage was 150,000.”

“The contact owns a 2018 Ram 3500. The contact stated that on several occasions while driving at high speeds, the vehicle drove over a bump in the roadway and the ABS warning light, electronic stability control warning light, and the check engine warning light intermittently illuminated but remained illuminated. The contact stated that prior to driving over the bump, the cruise control operated as designed; however, after driving over the bump, the cruise control failed to operate as needed. The vehicle was taken to Auto Zone for diagnostic testing. …”