2001 Chevrolet S10 Seat belts Problems

“Our ABS light keeps coming on and when it does the ABS don't work. It comes on whenever it wants. It is the same issues as the 2000 are having and they have a recall. It recently caused the back wheel not to move at all. We were told the spring inside the module is going out. It also affects the air bag from going on. Also, the ignition won't work the truck won't start. It takes several tries to get it to start. We were just told that it's the starter. The seatbelt locks intermittently and won't let me move.”

“The consumer was involved in a major collision where the vehicle flipped approximately 6 times and ultimately crashed into a wall. The front driver and passenger seat belts had come unlatched. The vehicle hydroplaned after hitting water in the road, spun around 5-6 times, flipped back to front, hit a rock wall, and flipped on its outside.”

“The consumer stated while driving at 35 MPH another vehicle came across the median and crashed into the vehicle. Upon impact the driver's seat belt failed to lock and both frontal airbags failed to deploy. The consumer sustained injuries to the neck and back. There was a fire coming from the engine area after impact. The fire department cut all the electrical wires to extinguish the fire. Although the police responded no report were filed. The vehicle was towed to the dealership were it has not been inspected.”

“Clips in the seat belt designed to keep the metal latch in place fell out, resulting in unraveling. Dealer notified and replaced seat belt. Both front seat belts also do not retract properly; on occasion, the seat belts will not pull from their housings at all.”

“Driver's side seat belt will not retract from housing mechanism. Also, when vehicle was stopped with foot depressed on brake pedal, pedal went all way down to floor . Consumer has contacted dealer. Please provide any further details.”