2025 Mazda CX-5 Brakes Problems

“At stop signs, in a row of 3 or 4 cars, on the 3rd or 4th stop, I apply the brake but it accelerates as i am braking, moving forward 8 or 10 feet. Over the course of 1800 miles, this has occurred 3 or 4 times, narrowly avoiding collisions.”

“I pulled the car into garage, and realized it's not inside enough. So I moved the car forward, but forgot to place the shift to P position. With the shift in D position, I shut off the engine, opened the door, ready to get out. I did not notice the car was moving backward, until the open door hit the garage frame. I file a claim with my insurance, had the front door replaced in a local body shop. I confirmed that in D position, with engine shut off, the car can move freely in my drive way. …”

“At about 6:50am July 7th 2026, I was getting in the exit lane of interstate 50 to exit. I merge into the lane and being applying my breaks since I was going about 55-60mph. However, my vehicle did not slow down. I began to press harder, it still did not slow down, so I pressed as hard as I could because I was rapidly approaching stopped vehicles. The vehicle began to make a grinding sound, it started shaking, and then a break light appeared on the instrument panel. After this it came to a sudden and violent stop. …”

“On May 21st , 2026, while waiting in line to make a right turn (positioned 3rd in queue), the vehicles ahead moved forward. As I transitioned from the brake to the gas pedal to follow, the vehicle experienced an instantaneous engine stall and total electrical failure (NOT an i-Stop event). Pressing the gas caused the vehicle to slowly roll backward. When I immediately tried to reapply the brakes, the brake pedal became extremely stiff and nearly impossible to press down, failing to hold the vehicle effectively. The driver behind me began honking aggressively due to the imminent collision risk. …”

“2025 Mazda CX-5. The vehicle experienced a severe, dynamic charging system failure that creates an active safety hazard on public roads. A dealership service department attempted a software update, which turned off the active dashboard layout indicator but completely failed to resolve the root hardware issue. The system failure remains active and has thrown consecutive advanced safety system faults. …”