Skip to content
SteeringPart report

2000 Toyota Tundra Steering Problems

Complaints
43about this part
Share
4%of 1,011 total for the year
Median mileage
110,000miles
Trend
RisingComplaints filed in the last 3 full calendar years are at least 25% higher than in the 3 years before.

NHTSA recorded 43 complaints about the steering of the 2000 Toyota Tundra, 4% of the 1,011 complaints for this model year. Where a mileage was given, the median is 110,000 miles. 2 of these say a crash was involved, according to the filers.

Example complaints

Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.

“Truck is very hard to steer at low speeds and doesn't correct when coming out of a turn. Steering wants to freeze up when making a u turn. I've heard that the ball joints can snap and send the truck careening out of control. I bought this truck specifically to have something safe for traveling long distances and cannot have a malfunction like this happen.”

NHTSA complaint #10700937, filed 2015-03, 118 miles

“Driving home from work 1-28-2015 my 2000 Toyota Tundra,without warning the front driver side slammed to the ground sliding to a dead stop the tire jammed under the body of the truck,very frightening to think what if I was driving faster or if another car was coming towards you or from behind,after calling a tow truck and getting the vehicle off the ground we were able to see the ball joint failed.”

NHTSA complaint #10679817, filed 2015-01, 260,000 miles

“The rust on my 2000 Tundra extends to more than just the rear cross member that my local dealer reported and Toyota is willing to replace. I looked under the truck today and a lot of the front end is rusted away. The steering rack has rusted to the point of having a hole in it that pumps power steering fluid onto the road. Very dangerous.”

NHTSA complaint #10307923, filed 2010-02, 80,000 miles

“Well at 48,000 my master cylinder stopped working. Sept of 08 the rack and pinion steering rotted away and I also noticed my frame rotting back in 05.. And now I can peel metal of my frame. I just put 1800 dollars into a dyeing horse... I bought Toyota for a reason. They built some trucks on frames knowing they were no good in new england weather.... Please help ...”

NHTSA complaint #10289394, filed 2009-10, 100,000 miles

“Frame recall - the frame originally received the crc coating from kerry Toyota during the frame recall (unknown recall number and time of application). The coating has failed and as a result the steering rack mounts have separated from the frame due to rust. The bolt and mounting point are still together, but broken from the crossmember. I was driving down the road when there was a sudden change in how the steering was operating. It was causing me to wonder around in my line. I felt I had very little control on the steering. …”

NHTSA complaint #11013094, filed 2017-08, 124,000 miles

Related service bulletins

Steering: other model years

YearComplaintsShare of year
202638%
202586%
202482%
2023123%
202292%
202128%
2020511%
201934%
201855%
201756%
201676%
201524%
201466%
20131012%
2012128%
20111914%
201064%
200925%
2008113%
2007113%
2006255%
2005216%
2004266%
2003226%
2002388%
2001236%
2000434%

Other parts of the 2000 Toyota Tundra

Body and structure
529 complaints
Brakes
276 complaints
Suspension
100 complaints
Transmission and drivetrain
51 complaints
Engine cooling
44 complaints
Other or unknown
34 complaints
Fuel system
22 complaints
Vehicle speed control
20 complaints
Air bags
19 complaints
Tires
19 complaints
Seat belts
18 complaints
Electrical system
11 complaints

← All problems reported for the 2000 Toyota Tundra

About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 30, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.

To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology