1995 Jeep Cherokee Electrical system Problems

“Recently, while on I-75 n in atlanta, ga a vehicle swerved in front of me. I veered to avoid impact and the drivers seatbeat buckle on my vehicle became dislodged and has not worked properly since this date.”

“On 9/30/03 wiring terminations at ignition switch in steering column failed. Evidence of previous arcing and deformation of wiring, connector, and plastic cover over steering column were present. Dealership was aware of this problem happening as they have seen it before and have prescribed a fix for the situation that deviates from replacing the entire wiring harness. If this is the case they there must be quite a few cherokees that are out there that are having this problem. I my self have noticed quite a few burnt up interiors at local salvage yards where I do business my self. …”

“Dear sirs, I have discovered a very dangerous electrical hazard that is occurring on all the 1990's Jeep Cherokee se models. On the 4.0 liter 242 cubic inch models, the dashboard switch that controls the airflow after only a few years of use shorts out melting and causing a severe danger problem. When this brown plug melts it also shorts out the 30 amp fuse that is connected to this area. After investigating several of these same models it is a dangerous design fault that needs to be addressed. Can you please take some corrective action before someone gets injured or killed from this? …”

“While driving 55 MPH, the vehicle stalled without warning. The consumer was able to restart the vehicle. The vehicle was taken to the dealer for inspection three times. The mechanic was unable to duplicate the problem. The ignition switch and the wiring harness was fixed.”

“Wiring short between power distribution center & fuse box. Turn on headlights & no dash lights,no tail lights,no door buzzer,no transmission indicator lights & no parking lights.”