2000 Jeep Cherokee Other or unknown Problems

“I bought this truck used from a private owner in march of 15, check engine light was on was told it was on because they changed the gas cap on it in june of 15 I was at a store parked went into the store came back out truck wouldn't start no lights nothing jumping didn't do anything had to tow it home, then tow it to the repair shop where they said it was the starter and we placed that ( $394.93) truck ran fine for about 2 weeks same thing, going to tow it the repair shop again next week”

“Jeep acelerated on its own causing me to have to stand on the brakes(thinking I had ABS) brakes did not work correctly, causing me to hit the back of a 4x4 truck at the speed of about 15 MPH all bumper parts had to be replaced as did many other parts air bags did not go off. Today I took the Jeep back to dealer for the 4th time to try to get thing taken care of .on the 1st trip I was told that my ABS breaks were working fine and that the mechanic felt them kick in. …”

“'check gauges' light comes on multiple times, temperature gauge to redline for a few minutes, then back to normal. Brought in to be checked/fixed 5 times, 'no leak', 'no problem detected', 'radiator hose loose', 'added coolant' until this last time: 'cracked head'; also oil gauge recently shows no pressure with great frequency, as with temperature gauge. I had been adding coolant every few weeks. I believe this problem could seize the engine while vehicle is in motion.”

“Temperature into red on several occasions and lowers when heat turned on. Oil pressure to zero at start up and while driving at range of speeds.engine check light on. Been for repairs 5 times. Have been told rack and pinion leaking, needs new short block, gauge panel faulty, catalytic converter, and again new short block needed. Problem persists.”

“While traveling at 40-45 MPH vehicle commenced to vibrate/shook, followed by engine check light coming on, and then vehicle lost power. Dealer notified, and had vehicle towed into shop. Informed consumer that the electronic control module had failed and needs replacement. Provide further details.”