2024 Ram 1500 Steering Problems

“As I was about to pull into my driveway my accelerator did not respond to braking I was going very slow about to make a left turn , less than 10mph Just As I started the left turn the wheel became unresponsive and the accelerator did not deccelerate At the same time my control panel seemed to glitch/flash I put both feet on the brake and stood on it as the truck continued forward until it struck the mailbox The truck stopped at that point but I could still hear the rear wheels turning on the road until I put it into park”

“I am filing this complaint regarding my 2024 Ram 1500 and unresolved defects that I reported while the vehicle was still covered by the bumper-to-bumper warranty. My primary concern is the steering and handling. I reported multiple times that the steering wheel is crooked, the truck pulls to the left, and the vehicle does not drive or track correctly. These complaints began before the bumper-to-bumper warranty expired. I was told that the vehicle needed an alignment and four new tires. I followed those recommendations and paid for both, but the problem never went away. …”

“Took delivery of new truck (2024 Ram 1500 4x4 Laramie) on September 25th. On September 26th, while backing into a parking space, the engine cut off and multiple error lights illuminated (including check engine light). I was able to re-start the vehicle and back into the space. Dealer investigated, determined that a fuse was loose. On October 14th, while pulling into a shopping center road, the engine shut off and the same series of error lights, including the check engine light, illuminated. …”

“The contact owns a 2024 Ram 1500. The contact received notification of NHTSA Campaign Number: 24V729000 (Steering, Exterior Lighting); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.”