2023 Ram 1500 Steering Problems

“I was moving forward about 5 mph to merge on to the main road when the emergency brake engaged, engine shut off, steering wheel locked and the 2023 Ram 1500 stopped blocking traffic. Instrument panel instructed me what to do . This was a dangerous situation especially if I was moving at a greater speed.”

“experienced the exact same failure mode as Ram Recall 24V-729 and my truck and model year fall into the affected vehicle models however my VIN # was not included in the recall. My blinkers do not work as exactly described in 24V-729 and Ram refuses to take financial responsibility of this known issue and make me pay for this safety concern especially when its a known safety recall this year and model truck.”

“Steering column control module went out. Right blinker will not stop and left doesn't work at all. Even in the off position right stays on so I have to put it down to the not working left to stop that but any movement and its starts again. It is a traffic hazard and even though 165,000 Rams were recalled this past year they say its VIN specific and will not cover my $400 repair. My truck is unusable until they repair this.”

“The issue concerns the steering column control module, when the turn signal is used or activate the turn signal self-canceling feature may not function properly. Either issue can cause confusion or reduce visibility for other vehicles, increasing the risk of a crash. I have asked the dealer to fix the issue but have told me they have been out of stock of the part and I have been waiting over 6 months for the fix with no resolution.”

“I own a 2023 Ram 1500 Limited 4x4 with approximately 53,000 miles. The truck has had no issues for the first 40,000 miles and then developed a noise and vibration coming from the front end that is present at all speeds. I took it to Jerry Ulm Chrysler Dodge Jeep Ram in Tampa, FL. They kept my truck for 14 days and replaced the axle, stub shaft, wheel hub and bearing assembly. The truck was returned to me with the exact same noise and vibration — the repair did not fix the problem. …”