2007 Chrysler Pacifica Body and structure Problems
- Complaints
- 20about this part
- Share
- 6%of 326 total for the year
- Median mileage
- 59,228miles
- Trend
- FallingComplaints filed in the last 3 full calendar years are at least 25% lower than in the 3 years before.
NHTSA recorded 20 complaints about the body and structure of the 2007 Chrysler Pacifica, 6% of the 326 complaints for this model year. Where a mileage was given, the median is 59,228 miles. 1 a fire, according to the filers.
Example complaints
Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.
“2 issues with my 2007 Chrysler Pacifica. 1: the frame is mostly rust. The main problem with my 2007 Chrysler Pacifica is the electrical system. The I have had the battery tested and it is good. The starter was replaced and the car continued to start for two more weeks before it hasn't started since.”
NHTSA complaint #11242959, filed 2019-08, 69,000 miles“I have a 2007 Pacifica, it started shaking bad. Took it into the dealer and the motor mounts where replaced. At the sametime the torque converter was also replaced. Because the torque converter would unlock when given a little we took the car back three times for this problem. The dealer says that this was normal???? But we don't think so.”
NHTSA complaint #10267259, filed 2009-04, 38,986 miles“I purchased my 2007 Chrysler Pacifica at a dealer ship in february 2017. I have just had the vehicle for 5 months. The car had everything running and when I say everything running; I mean A/C was working just fine as well as the heater and all windows rolled up and down. I had everything updated on this vehicle. Now 5 months later, I have neighbors on 7/25/2017 at around 2pm that witnessed my car catching on fire. How? I don't know and I am confused and worried because I had just pulled up to my home with my fiance. …”
NHTSA complaint #11010663, filed 2017-07, 141,000 miles“I have a 2007 Chrysler Pacifica touring that I have had to repair motor mounts several times. When the car is stationary and then in motion the problem occurs. When I accelerate the car does not have it's full power potential because acceleration causes the engine to immediately raise up and then quickly drop down. I hear the engine hit the frame with a loud bang when it drops. This happens in motion, on city streets, and the highway. I believe this has caused other engine problems that I have repaired over the years.my motor mount replacement years are 2010,2012,2013, and 2016. …”
NHTSA complaint #10881944, filed 2016-07, 152,710 miles“I purchased my 2007 Pacifica in 2009 with about 30,000 miles from Chrysler, elk grove, california. Upon reaching about 57,000 miles, when accelerating, I would hear loud metal banging from the engine area. I would also feel a hard jolt when accelerating. After visiting Chrysler, elk grove service center, I was told that 3 of my Pacifica engine motor mounts failed and needed immediate replacement at about $1000.00 dollars. I asked if this problem would occur again and was told I should have no further problems with the engine mounts by Chrysler, elk grove. I paid for replacement. …”
NHTSA complaint #10474981, filed 2012-09, 105,000 milesRelated service bulletins
- 10175743Apr 30, 2020Disinfectant Solution Recommended for COVID-19
- 10220101Nov 20, 2019Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Nov 20, 2019Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage…
- 10220097Nov 20, 2019Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10169249Nov 20, 2019Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169245Nov 20, 2019Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10219706Mar 5, 2016Magnesium Inner Liftgate Repair And Appearance Characteristics
- 10209577Mar 5, 2016Magnesium Inner Liftgate Repair And Appearance Characteristics
- 10140239Mar 5, 2016Magnesium Inner Liftgate Repair And Appearance Characteristics This bulletin involves discussing magnesium inner liftgate repair warnings and appearance characteristics.
- 10209647Jan 13, 2016W5A580 (NAG1) Valve Body - complete
Body and structure: other model years
| Year | Complaints | Share of year |
|---|---|---|
| 2025 | 2 | 7% |
| 2024 | 2 | 4% |
| 2023 | 1 | 1% |
| 2022 | 3 | 1% |
| 2021 | 8 | 2% |
| 2020 | 3 | 2% |
| 2019 | 10 | 3% |
| 2018 | 19 | 2% |
| 2017 | 62 | 4% |
| 2008 | 14 | 14% |
| 2007 | 20 | 6% |
| 2006 | 198 | 27% |
| 2005 | 413 | 33% |
| 2004 | 323 | 36% |
Other parts of the 2007 Chrysler Pacifica
88 complaintsEngine
76 complaintsElectrical system
51 complaintsFuel system
42 complaintsSteering
40 complaintsEngine cooling
33 complaintsOther or unknown
21 complaintsSuspension
21 complaintsBrakes
16 complaintsElectronic stability control
15 complaintsVehicle speed control
14 complaintsAir bags
11 complaints
← All problems reported for the 2007 Chrysler Pacifica
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 27, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.
To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology