2017 Chrysler Pacifica Lane departure Problems

“This happens every single time we drive our Pacifica: Per many other complaints available online, the current gen Pacifica (2017-present), when equipped with ADAS such as lane keep assist, has a steering issue as follows: -under varying conditions, the vehicle's steering wheel will stick. This issue typically follows a small steering input of 10-25 degrees in either direction. …”

“We experienced a failure of the entire steering rack assembly and tie rod ends and also the control module for the steering system. The repair cost was just under $5,000.00. I question why the entire rack and pinion steering system needed to be replaced. I ask what component failed on on the steering rack and what specifically fail on the steering control assembly. No logical answer was provided. I told the dealer I brought the Van in for a diagnosis of concerning steering corrections taking place even with the steering adaptive function turned off. …”

“The contact owns a 2017 Chrysler Pacifica. While the contact's wife was driving at an undisclosed speed through an intersection, the automatic braking system engaged independently, and the engine shut off. Despite the sudden failure, the contact's wife was able to restart the vehicle and resume normal driving. The contact then stated that while driving at slow speeds, the failure reoccurred with the Lane Departure Assist message flashing on the instrument panel. The manufacturer was notified after each failure had occurred; however, the contact was not offered any assistance. …”

“While driving you feel the steering wheel sticking when at a certain degree. It has mostly occurred when on a curve and when going over 40 mph. We take several long trips and it has happened multiple times.”

“Right and left lower control arms are failing. Steering rack replacement is required for repair and imperative for safe vehicle driving. The safety of people in the car is greatly at risk. Since learning about the true problem, the van is parked and we're having to borrow another car for transportation. The issue is that when turning, the steering wheel gets stuck. This seems to occur at 11 o'clock and 1 o'clock positions during turns. The Chrysler dealer was able to reproduce the issues when taking the car on a test drive. The component has only been inspected by the dealer. …”