2013 Jeep Grand Cherokee Steering Problems

“My Jeep Grand Cherokee overland with quadra lift suspension , has had a front steering shimmy ever since I have owned it.it has had four ,four wheel alignments in six months, and is on third set of tires.there are no loose parts , I have been informed,that the five star alignment shop cannot find the problem.it starts at just over 60 MPH.and gets worse as the tires wear into the shimmy.which doesnt take long, even with constant tire rotations.”

“My Jeep has stalled twice while I was making a left turn. Both times it stalled without warning and I lost all power steering + power brakes. Both times I had about 1/4 tank of gas. The first time I was able to restart my car right away. The 2nd time it took me a few tries to get it restarted. The dealership claims they can't find anything wrong with it. I've opened a case with Jeep.”

“On september 1, 2020 shortly after starting the vehicle and while in motion, the engine stopped causing loss of control of the vehicle. I was able to bring the vehicle to stop in roadway with hard pressure on brakes. Fortunately, no contact was made with person or property. I attempted to re-start the vehicle but it would only crank and not start. Several minutes later was able to restart the vehicle. The vehicle has had trouble starting on many occasions prior but this was the first time it stopped while driving. …”

“Power steering making noise loud , had it checked out and dealership tells me all 2013 does this. Well a week later after they looked at I lost power steering with a baby in car.”

“While driving my car in the city, I experienced a sudden engine shutdown, and entirely lost control over the car (steering, breaks etc.) the car was towed to chrysler's certified garage, where the malfunction was identified as a failure of the fuel pump relay (the same relay which was already been replaced, as part of recall r09). The garage also re-confirmed that this relay has been replaced under the recall, in 2015. The meaning of this failure demonstrates that practically, replacing the unit under recall r09 has not solved the problem and the risk is still there! …”